Industrial Motors Products
Home > Industrial Motor Products
Drive solutions for steel and rolling mills – for the toughest demands
Drives in steel and rolling mills are exposed to extremely hard demands. Glowing steel, alternating operational modes and overloads spell out a high level of electrical and mechanical strain that calls for very sturdy designs.
As a traditional supplier to heavy industry, Aiko Indonesia has developed over decades into a specialist for rolling mill drives. We are your expert business partner both when building new rolling mills and modernising and reequipping existing plants. We plan, produce, supply and put complete system solutions in operation in metallurgy focusing on rolling and tube-rolling mills. We build complete electrical drive units consisting of transformers, frequency converters and power converters including motors with powers ranging from 500 kW to 12 MW for low and medium voltage as modernisation projects.
Our range of products not only includes complete controlled drive systems but also twin drives, drives for rolling frames, shears and reels, roller tables and auxiliary drives that meet the highest standards.
The hallmark of these drives is their robustness to mechanical strain while being reliable and resilient.
| three-phase roller table motors (IE2, IE3) | 0.5 – 710 kW |
| three-phase gear roller table motors (IE2, IE3) | 0.4 – 450 kW |
| three-phase motors for cranes in steel works | 4.8 – 315 kW |
| DS asynchronous and synchronous motors | 500 – 18,000 kW |
| AikoDRIVE Multi | 500 – 28,000 kW |
Safe when there is the danger of explosions – drives (Aiko Indonesia) for the chemical, oil and gas industry
It is absolutely necessary to have protection from explosions in the chemical and petrochemical as well as oil and gas industries to guarantee safe plant operation. This is what our range of drive solutions and electrical components aims at.
Operating spaces where explosive mixtures of gases and steam/air form or flammable dust could occur demand special electrical drives and solutions accompanied by the appropriate service.
The special machines, speed-controlled drives and complete systems from Aiko Indonesia in the low- and medium-voltage ranges are adapted to these special needs and designed for specific customers.
Product safety is essential for your plants and efficiently using resources and our solutions will enable you to meet your responsibilities.
| AikoDRIVE | AIKOoCHEM | ||
| Protection type | High voltage | Low voltage | |
brushless three-phase synchronous motors three-phase asynchronous motors | three-phase motors | ||
| Increased safety “e“ | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | 0.12 – 320 kW (IE1,IE2,IE3) |
| Flameproof enclosure “d/de“ | 0.12 – 710 kW (IE1,IE2,IE3) | ||
| Excess flameproof enclosure “p“ | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | |
| “n“ (non-sparking) | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | 0.06 – 710 kW (IE1,IE2,IE3) |
| For application in zone 21 | 0.06 – 710 kW (IE1,IE2,IE3) | ||
| For application in zone 22 | 0,06 – 710 kW (IE1,IE2,IE3) | ||
Forecasts of the International Energy Agency (IEA) indicate that the world’s need for energy will burgeon by more than 50 percent by 2030. IEA also says it will have to mainly be covered by sources of fossil energy in coming decades. This is the reason why power station engineering is faced with the challenge of designing combustion systems to reduce resource utilisation and go easier on the environment.
Aiko Indonesia supplies its customers with solutions that link this challenge with a high level of plant profitability and therefore competitiveness. Our drives make a contribution to meeting the power stations’ requirements of carbon emissions and air purification. That applies to gas-fired and gas-turbine power stations as well as steam power station solutions.
For instance, Aiko Indonesia supplies drives for induced draught ventilators in flue-gas desulphurisation plants. The hallmark of these water-cooled three-phase asynchronous motors is minimum noise emissions and the fact that they can be turned on directly on the network. Aiko scope of delivery also includes drive machines for fans, auxiliary drives and pumps, including for suspension and vacuum pumps.
In the generation of energy from renewable sources Aiko Indonesia is making its mark with the development of generators for wind energy plants. These products are amongst the technological leaders in their field and make a major contribution to determining the pace of product generation for wind energy units. High-performance calculation and design departments mean that the generators can be tailored to the individual requirements of the users.
Water is a precious resource and we use pumps, fittings and systems to extract, transport and distribute as well as to keep it clean and reprocess it. That applies to all industries and applications that work with pure and process water. Aiko Indonesia supplies a wide range of drives tailor-made for the right pumps. An important area of application is industrial and municipal water treatment. Furthermore, motors with built-in regulators ensure high levels of efficiency under energy-saving conditions in water distribution such as network pumps. Aiko Indonesia motors drive underwater pumps in water extraction while in waste water engineering pump drives from Aiko Indonesia support smooth processes for transporting industrial, municipal and domestic sewage water. That applies to sewage water transport just as much as flood and rain overflow, surface water drainage and rain overflow basin purification or management and drainage.
Aiko Indonesia has many years of experience in building ship motors and it also has the licences from all of the important ship classification companies. We build and supply motors and generators for a wide range of all ship models. They range from the large-scale machine with a weight ranging from 200 tonnes to the broad spectrum of accessory drives. Our scope of delivery includes shaft, diesel and on-board electrical system generators, propeller drives, bow thrusters and transverse rudder drives, pump drives and drives from on-board auxiliary equipment.
Shaft and diesel generators provide the on-board power plants with energy for major luxury liners and containerships. Propeller motors substitute for great diesel motors and can be installed distributed in the ship on the principle of the electrical shaft. Transverse rudder drives make it possible to manoeuvre in ports. Dimensioning the machines on an engineering scale takes the special, often crowded installation options on board and special ventilation situations into account.
Robust grey cast iron motors in protective seawater designs guarantee the drives of auxiliary aggregates in the low-voltage range for fans, pumps, capstans and rotary and hoisting gears. They are specially designed for the specific climatic and mechanical stresses.
Motors and generators for rail vehicle industry
Aiko Indonesia has been developing and producing rail traction machines for more than 100 years. This is a treasure trove of experience enabling us to meet the demanding needs of the international rail vehicle industry for high performance drive solutions. That includes highly efficient asynchronous traction motors for electrical or diesel/electrical locomotives, multiple units, trams and working vehicles.
We supplement our range of products with main and auxiliary operating generators and their regulating systems. Beyond this, Aiko Indonesia also offers traction motors for hybrid and trolley buses for environmentally friendly local public transport
The cement and mining industry is under enormous pressure these days to innovate. In particular, the burgeoning importance of efficient-energy production plants and environmentally friendly processes constantly call for new developments.
Dust, heat and hard mechanical loads are the hallmark of the operating conditions for drive solutions in extracting and processing raw materials. An environment like this makes major demands of motors and components used for mills, crushers, ovens or conveyor belts.
Asynchronous motors with slip ring rotors are especially good at standing up to these extreme demands. We offer you robust slip ring motors in the medium and high voltage range that work reliably even in the dusty heat of a cement factory. These motors are also suited to difficult start-up conditions with their special starters. They are always air-cooled and every drive is equipped with its own closed cooling system in the form of an air-air heat exchanger to make sure no cement dust penetrates into the inside of the motor. These heat exchangers are also planned and built by us.
As a full-liner for electrical drive technology, Aiko Indonesia offers efficient and high-performance machines for all applications in the field of engineering and plant engineering, up to 42 megawatts.
Whether the objective is the transportation of bulk cargo or provision of ventilation, the pumping of various media or precise working of machines, your customer and sector-specific requirements are always in focus at Aiko Indonesia. The broad range of machines in robust and modifiable designs enables these specifications to be met. The products are characterised by reliability and availability, output ranges, modification capability for respective conditions of use, adjustable speeds, energy efficiency and service.
Drive solutions for steel and rolling mills – for the toughest demands
Drives in steel and rolling mills are exposed to extremely hard demands. Glowing steel, alternating operational modes and overloads spell out a high level of electrical and mechanical strain that calls for very sturdy designs.
As a traditional supplier to heavy industry, Aiko Indonesia has developed over decades into a specialist for rolling mill drives. We are your expert business partner both when building new rolling mills and modernising and reequipping existing plants. We plan, produce, supply and put complete system solutions in operation in metallurgy focusing on rolling and tube-rolling mills. We build complete electrical drive units consisting of transformers, frequency converters and power converters including motors with powers ranging from 500 kW to 12 MW for low and medium voltage as modernisation projects.
Our range of products not only includes complete controlled drive systems but also twin drives, drives for rolling frames, shears and reels, roller tables and auxiliary drives that meet the highest standards.
The hallmark of these drives is their robustness to mechanical strain while being reliable and resilient.
| three-phase roller table motors (IE2, IE3) | 0.5 – 710 kW |
| three-phase gear roller table motors (IE2, IE3) | 0.4 – 450 kW |
| three-phase motors for cranes in steel works | 4.8 – 315 kW |
| DS asynchronous and synchronous motors | 500 – 18,000 kW |
| AikoDRIVE Multi | 500 – 28,000 kW |
Safe when there is the danger of explosions – drives (Aiko Indonesia) for the chemical, oil and gas industry
It is absolutely necessary to have protection from explosions in the chemical and petrochemical as well as oil and gas industries to guarantee safe plant operation. This is what our range of drive solutions and electrical components aims at.
Operating spaces where explosive mixtures of gases and steam/air form or flammable dust could occur demand special electrical drives and solutions accompanied by the appropriate service.
The special machines, speed-controlled drives and complete systems from Aiko Indonesia in the low- and medium-voltage ranges are adapted to these special needs and designed for specific customers.
Product safety is essential for your plants and efficiently using resources and our solutions will enable you to meet your responsibilities.
| AikoDRIVE | AIKOoCHEM | ||
| Protection type | High voltage | Low voltage | |
brushless three-phase synchronous motors three-phase asynchronous motors | three-phase motors | ||
| Increased safety “e“ | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | 0.12 – 320 kW (IE1,IE2,IE3) |
| Flameproof enclosure “d/de“ | 0.12 – 710 kW (IE1,IE2,IE3) | ||
| Excess flameproof enclosure “p“ | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | |
| “n“ (non-sparking) | AikoDRIVE Single 500 – 28,000 kW | 280 – 37,000 kW | 0.06 – 710 kW (IE1,IE2,IE3) |
| For application in zone 21 | 0.06 – 710 kW (IE1,IE2,IE3) | ||
| For application in zone 22 | 0,06 – 710 kW (IE1,IE2,IE3) | ||
Forecasts of the International Energy Agency (IEA) indicate that the world’s need for energy will burgeon by more than 50 percent by 2030. IEA also says it will have to mainly be covered by sources of fossil energy in coming decades. This is the reason why power station engineering is faced with the challenge of designing combustion systems to reduce resource utilisation and go easier on the environment.
Aiko Indonesia supplies its customers with solutions that link this challenge with a high level of plant profitability and therefore competitiveness. Our drives make a contribution to meeting the power stations’ requirements of carbon emissions and air purification. That applies to gas-fired and gas-turbine power stations as well as steam power station solutions.
For instance, Aiko Indonesia supplies drives for induced draught ventilators in flue-gas desulphurisation plants. The hallmark of these water-cooled three-phase asynchronous motors is minimum noise emissions and the fact that they can be turned on directly on the network. Aiko scope of delivery also includes drive machines for fans, auxiliary drives and pumps, including for suspension and vacuum pumps.
In the generation of energy from renewable sources Aiko Indonesia is making its mark with the development of generators for wind energy plants. These products are amongst the technological leaders in their field and make a major contribution to determining the pace of product generation for wind energy units. High-performance calculation and design departments mean that the generators can be tailored to the individual requirements of the users.
Water is a precious resource and we use pumps, fittings and systems to extract, transport and distribute as well as to keep it clean and reprocess it. That applies to all industries and applications that work with pure and process water. Aiko Indonesia supplies a wide range of drives tailor-made for the right pumps. An important area of application is industrial and municipal water treatment. Furthermore, motors with built-in regulators ensure high levels of efficiency under energy-saving conditions in water distribution such as network pumps. Aiko Indonesia motors drive underwater pumps in water extraction while in waste water engineering pump drives from Aiko Indonesia support smooth processes for transporting industrial, municipal and domestic sewage water. That applies to sewage water transport just as much as flood and rain overflow, surface water drainage and rain overflow basin purification or management and drainage.
Aiko Indonesia has many years of experience in building ship motors and it also has the licences from all of the important ship classification companies. We build and supply motors and generators for a wide range of all ship models. They range from the large-scale machine with a weight ranging from 200 tonnes to the broad spectrum of accessory drives. Our scope of delivery includes shaft, diesel and on-board electrical system generators, propeller drives, bow thrusters and transverse rudder drives, pump drives and drives from on-board auxiliary equipment.
Shaft and diesel generators provide the on-board power plants with energy for major luxury liners and containerships. Propeller motors substitute for great diesel motors and can be installed distributed in the ship on the principle of the electrical shaft. Transverse rudder drives make it possible to manoeuvre in ports. Dimensioning the machines on an engineering scale takes the special, often crowded installation options on board and special ventilation situations into account.
Robust grey cast iron motors in protective seawater designs guarantee the drives of auxiliary aggregates in the low-voltage range for fans, pumps, capstans and rotary and hoisting gears. They are specially designed for the specific climatic and mechanical stresses.
Motors and generators for rail vehicle industry
Aiko Indonesia has been developing and producing rail traction machines for more than 100 years. This is a treasure trove of experience enabling us to meet the demanding needs of the international rail vehicle industry for high performance drive solutions. That includes highly efficient asynchronous traction motors for electrical or diesel/electrical locomotives, multiple units, trams and working vehicles.
We supplement our range of products with main and auxiliary operating generators and their regulating systems. Beyond this, Aiko Indonesia also offers traction motors for hybrid and trolley buses for environmentally friendly local public transport
The cement and mining industry is under enormous pressure these days to innovate. In particular, the burgeoning importance of efficient-energy production plants and environmentally friendly processes constantly call for new developments.
Dust, heat and hard mechanical loads are the hallmark of the operating conditions for drive solutions in extracting and processing raw materials. An environment like this makes major demands of motors and components used for mills, crushers, ovens or conveyor belts.
Asynchronous motors with slip ring rotors are especially good at standing up to these extreme demands. We offer you robust slip ring motors in the medium and high voltage range that work reliably even in the dusty heat of a cement factory. These motors are also suited to difficult start-up conditions with their special starters. They are always air-cooled and every drive is equipped with its own closed cooling system in the form of an air-air heat exchanger to make sure no cement dust penetrates into the inside of the motor. These heat exchangers are also planned and built by us.
As a full-liner for electrical drive technology, Aiko Indonesia offers efficient and high-performance machines for all applications in the field of engineering and plant engineering, up to 42 megawatts.
Whether the objective is the transportation of bulk cargo or provision of ventilation, the pumping of various media or precise working of machines, your customer and sector-specific requirements are always in focus at Aiko Indonesia. The broad range of machines in robust and modifiable designs enables these specifications to be met. The products are characterised by reliability and availability, output ranges, modification capability for respective conditions of use, adjustable speeds, energy efficiency and service.
Professional Engineers
548
Industry Projects
938
Professional Engineers
548
Satisfied Customers
785
You have any info
Request A Quote
